Die Casting Parts Review

Pinless tag clip- zinc die casting parts

  • Zinc: ZA-8
  • Weight: 0.35 oz
  • Miniature  zinc
  • 100,000 parts in 4 weeks

Power conditioning module chases – aluminum die casting parts

  • Aluminum: 380
  • Weight: 2..3lbs
  • ̴12”ꭗ12” (30ꭗ30 cm)
  • Die built in 8 weeks
  • Replace machined component
  • Significant cost savings

Steering knuckles

Performance

  • Passed 1.4g cornering load at 130,000 min and 280,000 cycle’s max (4 to 8ꭗ req.)
  • UTS > 2ꭗ customer requirements in all tests
  • Lower control arm test: unbreakable (fixture failure)
  • Outperformed all previous AI knuckles
  • 10% weight reduction
  • 5% cost reduction

Thrust rods

Performance

  • ̴50% weight reduction
  • Ribs allowed stiffness needed
  • Three parts consolidated into one
  • Replaced stamped steel parts

Engine base bracket

Performance

  • 43.6% weight reduction over stamped steel fabrication
  • Met strength and ductility requirements
  • 16 parts to 1
  • 4 different brackets now one common bracket
  • Cost reduction confidential per customer
  • Up to 1M per year

Engine subframe

Performance

  • Welded to hydro/bulge formed and squeeze cast parts
  • 46% weld length reduction  ̴40% lighter
  • Down to 16 parts from 48 (66% less)
  • Cost reduction realized, but confidential

Shock tower

Performance

  • 40% weight savings
  • Eliminated 5 part steel assembly
  • Exceeded requirements
  • Elongation allowed self-piercing riveting
  • Allowed thin wall heat treatment

Porosity – background

  • Common in many die castings
  • Common in metal casting
  • All defects are characteristics of the process
  • Considered a defect when porosity level exceed requirements

Outline

  • Sources of casting defects
  • Process control of defects
  • Design control of defects
  • Measuring defects

The cause of defects

Background

  • Two sources of porosity
  • Solidification
  • Gas (various sources)
  • Smooth pores formed at high liquid fractions
  • Jagged pores formed at a lower liquid fraction
  • Many aluminum alloys shrink  ̴6%
  • Common casting pore fraction < 3%

Shrinkage porosity – summary

  • Shrinkage can account for all the porosity
  • To reduce shrinkage porosity
  • Feeding, feeding, feeding
  • Bigger gates
  • High pressure
  • Etc
  • Alloy design
  • Interacts with gas porosity

Dissolved gas porosity

Three major causes of gas

  • Hydrogen gas
  • Entrained air
  • Evaporation of lubes, water, etc…

cannot be separated from shrinkage easily

gas will fill shrinkage pores

Hydrogen porosity

hydrogen solubility

  • high in liquid
  • low in solid

during solidification

  • hydrogen gas rejection
  • forms porosity

typically

  • microspores
  • combine with larger pores

Entrained air porosity

air caught during filling

  • in short sleeve
  • during injection
  • poor venting

difficult to predict quantitatively

process variables and design affects air entrainment

The vacuum can be effective

Other gas porosity

typical other sources of porosity include:

  • die lube
  • plunger tip lube
  • water
  • hydraulic oil/heating oil leaks

color of porosity can help identify sources

  • dark = lubes
  • light/shiny = water

Reduce leaking

  • impregnation
  • reduce porosity
  • avoid removing skin
  • avoid soldering
  • move knit lines

practically

  • process control
  • gating
  • design

Aluminum Die Casting: Get Feeling And Quality With Die Casting

Die casting has become increasingly important in industries where precision is a concern. While providing customers with complete products, this process has become a major option for users. The arrival of large manufacturing and industrial units has improved productivity and performance. This method is used to shape and produce the product with the perfect finish. Generally made of non-ferrous metals, such as zinc, tin, aluminum, copper, magnesium, and lead-based alloys, it is characterized by the coercion of molten metal under high pressure in the mold cavity. They are relatively simple processes and reduce high costs. Suitable for large amounts of medium-sized cast iron, they retain dimensional consistency.

Aluminum Die Casting provides durable and stable parts. Despite providing a complex form of industrial parts in narrower tolerances, it eliminates or reduces secondary machining operations. Diecast parts have greater resistance to extreme temperatures. Regarded as one of the quickest and most cost-effective methods for generating various components, it has become the most recommended force in the metallurgical industry. Indispensable for many manufacturing industries such as hardware, electronics, automotive, and much more. It provides efficient, zinc, precise aluminum, and magnesium alloy components, with good mechanical properties and appeals to consumers.

Die Casting focuses attention on the application of scientific knowledge at its factory. This integrated process is essential for the manufacture of technical products that guarantee long-term benefits. This results in pieces with thinner walls with narrower dimensional borders and a smoother surface. With the advent of the automotive industry and the increase of trade, demand for mold parts has increased rapidly. This process can be done using hot or cold room. Zinc smelting is considered as the most efficient way to incorporate precision with the physical and extraordinary nature of zinc. With alu die casting, it is easy to use the careful components in large quantities and at low cost.

With constant quality in large volumes, ensure long mould life. Tested and certified by professionals, castings mark their excellence in all areas. If you are looking for these items, you can always use the online store or use their services through other sources. But before going, make sure you have the best knowledge and best advice to meet your specific needs.

Hopefully, this guide can be useful for you. Thank you for reading the article about aluminum die casting.

Aluminum Patio Furniture

There are two kinds of aluminum patio furniture- cushioned and non-cushioned. There are available designs which do not need to have cushions to feel comfortable when seated on. However, if your outdoor furniture needs cushioning, it is imperative that you select the right outdoor cushions. Since they will be exposed to extreme sunlight and moisture the entire day, the cushions must be made from sturdy and water- resistant fabric, which does not fade easily. There is a vast selection of designs and styles to choose from, as well as various patterns and colors to suit the overall exterior theme of your home sweet home.

It is therefore concluded that cast aluminum patio furniture will stand on your outdoor for several seasons to come- from winter and spring to summer and fall. They are designed to stand the test of time and make your family bonding times better and better. Spend ample time for taking a close look at the available options coming before you. The quality of a product should always top your list of considerations. Make sure that this investment will be something suitable for the specific lifestyle of your family.

Patio furniture made from this aluminum die casting element will neither fade nor rust. Therefore, you can keep them outdoors without any worry. Moreover, this aluminum is generally coated with powder paint particles which are bonded with the metal by means of a heating process to prevent the material from scratching, chipping and any other signs of wear. The durability of this material is one of the primary reasons why plenty of furniture makers, including the renowned ones, choose it. Rest assured that furniture pieces made from it possess extraordinary strength.

As a buyer, you can also have numerous options when it comes to color, style and design. If you want your patio to look simple, there are minimalist aluminum pieces of furniture available today. On the other hand, if you desire an elaborate outdoor space, there are elegant and intricate designs and styles to choose from. Aside from visiting a local furniture store, another way of finding these kinds of furniture is by shopping online.

In fact, this method will save you some bucks, because most of these products are available at reasonably lower prices. There are also online retail furniture stores that do not charge high shipping fees.

 

 

When to Use Die Casting

Metal Casters have the luxury of choosing between several casting methods to accomplish their goals. Often times the metal caster chooses one method and sticks with it for several years until need directs him to another. Of course, there are those adventurous few who like to sample each casting method to find the best fit. Sure, sand casting might be the most popular but what about Lost Foam or Investment?

What about Die casting?


Die casting is used by industrial foundries and manufacturers to create practically anything and everything, such as die cast cars. Many small foundries, like the one in your garage, backyard, of workshop may find that die casting is really just not economical. But who said that having fun and trying new things was ever economical? This process we aslo called high pressure die casting or pressure die casting, The process of Die Casting involves a simple concept. The molten metal is injected with high pressure into the mold or mold cavities. The mold used in die casting can have several small civilities of either the same pattern or different pattern.


The name Die Casting comes from the molds which are called dies. These molds are reusable and are often made from steel but other alloys can be used as long as they can withstand high pressure. The reason dies must be created from metal and not from sand or other material is due to the high amount of pressure used to get the molten metal into the mold. If sand molds were used in a Die casting procedure then the mold would crumble. There are plenty of advantages of using dies in a casting procedure which makes this method desirable for anyone wishing to create a high volume of similar castings.

Die casting is perfect for anyone that needs to make a lot of the same thing without any quality or pattern deviation. This is especially helpful in certain industries where quantity and quality count. Many hobbyists may have no use for die casting on a practical basis but will often try at least one Die casting for the sake of trying.

There are two types of machines used in the Die Cast procedure. These machines are essentially the same and are called the Hot-chamber and the Cold-chamber.

The Hot-chamber machine melts the alloy and feeds it into a section of the machine referred to as the gooseneck. A piston then forces the alloy into the mold. A separate furnace is not needed but the draw back of this is that metals with higher melting points can not be used.



The Cold-chamber is used for metals that can not be used by the Hot-chamber such as aluminum and copper. A separate furnace is needed to melt the alloy which is then poured into the injection cylinder and then shot into the mold.

The advantages of using Die casting vary but the most noticeable advantages are the repeated quality, smooth casting surface, and the quick production of casts. While the initial cost of Die Casting exceeds several of the other casting procedures, those that need a high number of casts in the shortest amount of time possibly will benefit greatly from the investment.

Die casting is commonly used to create commercial goods as it yields a high volume. The molds, or dies, used vary in life cycle depending upon the material used to create the die. The die can have one cavity or several cavities depending upon the need.

Everyone should try Aluminum die casting, magneium die casting or zinc die casting at least once if they can afford the initial cost. Besides, who knows when you’ll need a small battalion of metal soldiers which can be made quickly and easily with die casting.

Metal Casting

Charlie Chan arrives in Shanghai at the behest of the U.S. government to help stop an opium smuggling ring. He receives a warning aboard ship not to stop in Shanghai. He is met by his Number One Son, Lee Chan, as well as Philip Nash and his fiance, Diana Woodland. Charlie is the guest of honor at a banquet held that evening, hosted by Sir Stanley Woodland (David Torrence in an uncredited role). When Sir Stanley opens a box to give a handwritten scroll to Charlie, he is shot and killed by a gun inside the booby-trapped box. Charlie meets with Colonel Watkins, the commissioner of police, and agrees to investigate the crime. The next day, American FBI man James Andrews arrives in Shanghai, accompanied by his valet, Forrest (Gladden James in an uncredited role). That night, an assassin shoots what seems to be a sleeping Charlie Chan in bed. But Charlie, suspecting another attempt on his life, rigged a dummy and escaped death.
Watkins, Nash, and Woodland try to meet with Andrews. Nash sneaks off and goes through Andrews’ briefcase, suitcase, and other papers. Charlie arrives, and while he is speaking with Andrews is nearly shot. Charlie and Andrews managed to retrieve the gun, but the assassin escaped. A fingerprint on the gun reveals that Nash is the likely suspect, and he is arrested. A letter Nash had stolen from Andrews’ things seem innocuous, but Charlie takes it as evidence. Charlie returns to his hotel and meets with Lee. They receive a note from Col. Watkins asking them to come to an office downtown. They check with police headquarters, which assures them the note is genuine. Charlie goes, but Lee realizes the note is fake when Col. Watkins calls soon thereafter. Charlie is kidnapped and taken into a room to meet with a mysterious Russian (Ivan Marloff). Lee tries to save his father, but is caught. The two bluff their way out of danger, and after a brief fight manage to escape.

Metal Die Casting

That evening, Charlie and Andrews meet with Col. Watkins. Diana Woodland arrives and asks to see Nash; her request is granted. But Diana sneaks Nash a pistol, and the two escape. Later that day, Andrews and Charlie return to the house where Charlie was held. The gang has left, but Charlie finds an ink pad in the fireplace and takes it as evidence. Lee shows up dressed as a beggar, and Charlie sends him home. Oddly, Charlie arrives at the hotel first. Lee shows up later, and reveals that he saw their kidnapper in a taxi on the street and followed him to the Cafe Versailles. Moments later, Andrews calls and summons Charlie to his apartment. Before he leaves, Charlie sends Lee off on a secret mission. Charlie arrives at Andrews’ apartment, where the FBI agent has caught a gangster involved with the Marloff gang. After a punch to the jaw, the gangster reveals that the Cafe Versailles is where the opium gang is hiding out. Andrews calls the police, and asks them to meet them at the club. Charlie and Andrews leave for Cafe Versailles. After Charlie and Andrews depart, Andrews’ valet, Forrest, frees the gangster and the two leave. At the club, Nash (disguised as an able seaman) sees some of the Marloff gang heading toward the basement and follows, but is captured. Charlie and Andrews arrive moments later, and follow a gang member into the basement as well. The basement is where opium is being shipped out via riverboat, reached by a trap door. Andrews urges Charlie to go first, but Charlie hesitates when his flashlight mysteriously refuses to work. The police arrive by boat, and after a brief shootout capture the gang.
Charlie surprises everyone by arresting James Andrews. Lee Chan reveals that his father sent him off to cable America, and he has just received a reply which indicates that the real Agent Andrews was murdered in San Francisco three weeks earlier. The false “James Andrews” is really the leader of the Marloff gang, and intended to have the gang murder Charlie in a shoot-out when they descended through the trap door. Charlie knew Andrews did not really call the police, and had Lee summon them instead. Nash’s escape from police custody was planned by Charlie. Charlie reveals that Forrest used the ink pad to put Nash’s thumbprint on the revolver to frame him. Nash is declared innocent, and Andrews and Forrest go to jail. External links
Charlie Chan in Shanghai at the Internet Movie Database